[custom_adv] Getting ready to paint a wall? Don’t skip the prep work: A properly primed surface makes all the difference. This video shows how to make both painting and priming a snap. [custom_adv] Using a large cellulose sponge and a solution of water mixed with a few drops of mild dishwashing liquid, clean your walls to remove any dust, dirt, and grease. [custom_adv] Pour in enough so that it almost fills the well toward the bottom of the tray without covering the angled portion of the tray where the ridges are. [custom_adv] Run the roller up and down a section of the wall, applying primer until the section is fully covered. Continue until your wall is fully covered, reapplying primer to the roller as needed. [custom_adv] Keep applying paint flush against your taped trim, working it outward about two or three inches from the tape. Continue until you have finished painting a narrow swathe along all of the taped areas. [custom_adv] When the walls of your home are in desperate need of a new color palette, you might be tempted to just pick up a brush and go. But before you do, it will be helpful to be aware of a few painting fundamentals that can save you valuable time and effort. [custom_adv] The key to achieving a smooth, seamless finish lies in the preparation—after cleaning the wall and applying a base coat of primer, you can direct your attention to the outer edges of the wall and work your way inward using a color that makes the room irresistible to the eye. [custom_adv] faceplates, thermostats and other items along the wall and take them off. Starting with a smooth surface with no obstructions will help the project proceed much more efficiently. [custom_adv] Getting ready to paint a wall? Don’t skip the prep work: A properly primed surface makes all the difference. This video shows how to make both painting and priming a snap.
